The tool counter

Wide gaps separate sections without a fine finishing pattern; begin at the ends.

160 x 65 x 5 mm; 6 mm tooth gaps

Tail separates sections; fine teeth suit controlled finishing rather than working through knots.

220 x 28 x 4 mm; 95 mm tapered tail

A full handle provides an easy grip for everyday dry styling.

195 x 40 x 7 mm; 3 mm tooth gaps

Folding cover shields teeth in a bag; pivot is not a locking handle.

folded 105 x 28 x 12 mm; open length 195 mm

Fine and coarse spacing zones for smoothing or looser separation with the same tool.

Exact dimensions not verified

Curved claw gathers a twist; capacity depends on thickness, texture and the size of the section.

95 x 45 x 40 mm; opening 45 mm

Spring grip jaws hold a small section; release the grip before repositioning.

Exact dimensions not verified

Long narrow jaws separate temporary sections without a decorative top.

each 110 x 15 x 20 mm; two clips per set

Flat snap clips secure small loose sections; do not force over an oversized section.

each 60 x 18 x 4 mm; four clips per set

A separate stick passes through the slide and gathered section; choose by usable opening, not overall length alone.

bridge 100 x 45 x 5 mm; pin 145 x 6 mm